FOAM LATEX
Coming Soon
Typically either pro adhesive or silicone adhesives are used. We like brands like; Prosaid, Telesis, Westmore and Silabond.
Spirit Gum is alcohol based and harsh on the skin. We recommend either pro adhesive or silicone adhesive.
SILICONE
Coming Soon
TRANSFERS
HOW TO APPLY AND REMOVE
Skin Prep: Skin must be clean and free of any makeup, hair, dirt or oils.
Application:
Peel the clear plastic with the piece in it from the paper backing.
Place the piece face down on the adhesive paper
Press down the back of the clear plastic firmly to the adhesive paper
Gently peal the plastic backing off, leaving the piece attached to the adhesive paper backing.
Trim paper close to the piece, leaving a nice blending edge.
Place on desired area of skin and press down. (Apply an adhesive for extra hold if needed)
Using a wet sponge or cloth to saturate the back side of the paper backing.
Once fully saturated, gently peel off the paper backing.
If there are any air bubbles or areas that have not fully bee stuck down, wet your finger and press those areas in place.
Use isopropyl alcohol to blend off any areas that have thicker edging.
Finish off with any desired makeup to achieve your effect.
Removal:
Before removing your FX Transfer. clean off all makeup and blood using warm water or cleanser.
Very gently rub or pull up an edge of the FX Transfer and roll it onto itself forming a big sticky ball.
Use an adhesive remover or baby oil to remove remaining edges. Using skin wipes or a warm wet towel, rinse and wipe the skin. PLEASE BE GENTLE TO YOUR SKIN.
Note: FX Transfers are made with ingredients that are recognized as safe. As with any cosmetic, some people may have sensitivities. Test by applying to the inside of the wrist and remove after 30 minutes.
This item is not a toy and may be unsuitable for children under 14 years of age.
